How To Use The Wearable Vibrator & Lingerie Set？

Here is a step-by-step guide to help you charge, wear and control Elaros with ease and confidence.

📦 What’s in the box?

1× Vibrating Lace Lingerie With Dual Chest Vibrators
1× Matching Panty With Oval Vibrator
1× Rose Controller
1× Magnetic Charging Cable
1× Storage Pouch
1× User Manual

✨ 2-In-1 Wearable Vibrator & Lingerie Set

Elaros combines elegant lace lingerie with three wearable vibrating units for targeted stimulation.

The two round vibrators fit inside the chest area, while the oval vibrator fits inside the hidden panty pocket.

Wear them together with the lingerie or remove the vibrating units for separate use.

🎀 How To Wear And Use?

🔋 Before You Begin:

Fully charge the Rose Controller and Oval Vibrator before first use.

Make sure all vibrating units are clean and completely dry before installation.

🧲 Steps:

Step 1: Charge The Devices
Connect the magnetic charging cable to each charging port. The indicator light flashes while charging and remains on when fully charged.

Step 2: Install The Chest Vibrators
Place the two round vibrating units into the designated inner positions of the lingerie.

Step 3: Install The Oval Vibrator
Slide the oval vibrator securely into the hidden pocket inside the panty.

Step 4: Adjust The Fit
Put on the lingerie and adjust the shoulder straps, waist straps and decorative chain until the fit feels secure and comfortable.

Step 5: Power On The Chest Vibrators
Press and hold the Rose Button for 3 seconds to power on the dual chest vibrators.

Step 6: Power On The Oval Vibrator
Press and hold the button on the Oval Vibrator for 3 seconds to power it on.

Step 7: Select A Vibration Mode
Short-press the corresponding button to cycle through the vibration modes.

Wear the complete set together or use each vibrating unit separately to explore different sensations.

📱  App Connection And Control Guide

📲 Before You Connect:

Enable Bluetooth, Location, Camera and Microphone permissions on your phone so the App can connect and function correctly.

🔗 Steps:

Step 1: Download The App
Scan the App download QR code provided in the User Manual and install the App on your phone.

Step 2: Register And Sign In
Create an account using your email address, then sign in to the App.

Step 3: Add Your Device
Open the device connection page inside the App.

Step 4: Connect Elaros
Scan the device QR code inside the App or enter the connection code “3097.”

Step 5: Choose Your Mode
Select a preset vibration pattern or customize the vibration experience through the App.

Step 6: Enjoy App Control
Once connected, use your phone to adjust and explore the available vibration modes.

🚫Notice！

✅ For adults aged 18 and over only.

✅ Use a standard USB power source for charging.

❌ Do not use a fast charger.

❌ Do not use the vibrating units while charging.

✅ The vibrating units are IPX6 water-resistant.

❌ Do not soak or fully immerse the devices in water.

❌ Always remove all vibrating units before washing the lingerie.

✅ Make sure the devices and charging ports are completely dry before charging.

✅ Stop using the product immediately if you experience discomfort or skin irritation.

🔧 If The App Does Not Connect

Make sure the devices are powered on and close to your phone.

Check that Bluetooth and all required permissions are enabled.

Scan the device QR code again or re-enter “3097.”

Close and reopen the App before trying to connect again.